Finishes

Gold Smoke, Antique Copper, Chrome and Rose Finishes for Metal Furniture

Five signature metal finishes for furniture: how each is built, where it works best and how to care for it.

3 min readSerel Metal

Metal tubes in chrome, matte nickel, smoked, gunmetal, gold and antique brass finishes

Leading chemistry suppliers describe decorative finishing in a handful of families: bright, satin, antique and dark. Designers now treat the metal as a colour decision, not a default. At Serel Metal, five finishes carry most of that conversation: gold smoke, antique, antique copper, chrome and rose.

Every one of them is a layered system. The colour you see sits on a carefully built base, and the base decides how long the colour lasts.

Chrome: the benchmark

Copper levels the surface, bright nickel creates the mirror, and a thin chrome layer seals it with a hard, cool, slightly bluish skin. Chrome is the toughest and easiest-to-clean finish in the range, the first choice for dining chairs, office and contract furniture. For a softer look, the same system can be built on matte nickel.

Gold smoke: warmth with restraint

Gold smoke is a warm gold veiled by a soft, smoky depth, as if seen through tinted glass. It is built with a transparent tinted lacquer over a bright plated base, so the mirror underneath gives the colour its glow. It works especially well against dark fabrics, walnut and stone.

Antique: the look of time

Our antique finish recreates aged brass. A copper or brass layer is chemically darkened, the high points are relieved by hand to bring the warm metal back through, and the result is sealed with clear lacquer. On steel parts, the copper or brass layer also protects the steel, which has no protective oxide of its own. No two pieces are identical, and that is the point.

Antique copper: warm and earthy

The same principle applied to bright copper gives a deep red-brown body with glowing copper highlights on the edges and curves. It suits loft interiors, restaurants and classic hospitality projects, and pairs naturally with leather, aged wood and dark green or burgundy textiles.

Rose: soft and contemporary

Rose is a gentle pink-gold with the warmth of copper, always protected by a lacquer topcoat because copper tones react with air. It is a favourite for bedroom furniture, vanity pieces and lighter, Scandinavian-inspired collections.

Finish Look Best for Care
Chrome Cool, bluish mirror Dining, office, contract, high-use pieces Damp soft cloth
Gold smoke Warm gold under a smoky veil Lounges, hotels, dark fabrics, walnut, stone Soft cloth, mild soap; no solvents
Antique Aged brass, hand-relieved highlights Classic and boutique-hotel interiors Soft cloth; natural variation is intended
Antique copper Deep red-brown with copper highlights Lofts, restaurants, warm classic schemes Soft cloth; no polish creams
Rose Soft pink-gold Bedrooms, vanity pieces, light collections Soft cloth, mild soap

How to specify them

Approve every colour on a physical master sample made on your own part, because a tube bend or a weld changes how a finish reads. For antique and antique copper, agree two limit samples for the lightest and darkest acceptable variation. For lacquer-based tones, confirm the parts are for indoor use and share the cleaning guidance with your customers.

Serel Metal in İnegöl

Serel Metal, an ERHUN Metal company in the İnegöl Organized Industrial Zone, Bursa, produces gold smoke, antique, antique copper, chrome and rose finishes on steel and brass furniture legs, frames and accessories. Our robotic and manual plating lines handle both large series and special small-batch work. Ask for our finish sample set at info@serelmetal.com or export@serelmetal.com.

Have metal furniture parts to finish?

Send your drawing or a sample and we will reply within one business day.