Regulation

Chrome Plating Regulation in Europe: What Furniture Brands Should Know

Europe is restricting hexavalent chromium and PFAS. What the change means for chrome-plated furniture components, and what stays the same.

2 min readSerel Metal

Mirror-bright chrome-plated steel tube with water droplets

For more than half a century, the mirror chrome on a chair leg or a bed frame has come from one chemistry: chromic acid, the hexavalent form of chromium. Europe is now moving that chemistry from case-by-case authorisation to a general restriction. The final legal text is still being settled in Brussels, but the direction is clear.

What is changing

In September 2023 the European Commission asked the European Chemicals Agency (ECHA) to prepare a restriction covering chromium trioxide and related substances. ECHA published its proposal in 2025, and its scientific committees have been finalising their opinions through 2026. Chemistry suppliers moved early: MacDermid Enthone, one of the largest decorative-plating chemistry houses, told its customers in late 2023 to start preparing, and trivalent chrome processes now take a growing share of its catalogue.

PFAS is the second half of the story

Hexavalent chrome baths have long used fluorinated wetting agents to suppress toxic mist. These PFAS chemicals are now under regulatory pressure of their own. New trivalent processes are offered both chromium(VI)-free and PFAS-free, and suppliers are moving their remaining hexavalent lines to PFAS-free wetters as well.

Close-up of water droplets on a chrome-plated tube

Does the new chrome look different?

Early trivalent deposits often looked slightly yellow or grey next to classic chrome. Current white trivalent processes are designed to match the cool, bluish tone of traditional chrome much more closely. For a furniture buyer, the practical question is colour consistency between batches and between old and new parts.

What stays the same

Decorative chrome is only the top fraction of a micron. Depth of shine and corrosion resistance come from what lies underneath: correct pretreatment, a levelling copper layer and a well-controlled bright nickel. A weak nickel layer fails under any chrome.

What it means for buyers

If your next collection is destined for the EU, raise the chrome question at the sampling stage, not at the purchase order. That is the moment to agree on colour tolerance, the corrosion performance you expect and the documents you will need. At Serel Metal we follow these developments closely because most of the components we finish are exported.

Serel Metal in İnegöl

Serel Metal, an ERHUN Metal company in the İnegöl Organized Industrial Zone, Bursa, Türkiye, finishes steel and brass furniture legs, bed-base components and accessories in chrome, nickel and decorative colour finishes for brands in Türkiye and Europe. Our robotic and manual plating lines handle both large series and special small-batch work. Contact: info@serelmetal.com · export@serelmetal.com · www.serelmetal.com

Have metal furniture parts to finish?

Send your drawing or a sample and we will reply within one business day.