Plating layers

Bright Nickel, Matte Nickel and Acid Copper: How Decorative Plating Works

Chrome is the face, but copper and nickel do the work. How levelling copper, bright nickel and matte nickel shape the look and life of metal furniture.

2 min readSerel Metal

Cross-section of a chrome-plated steel tube showing copper, nickel and chrome layers

When you admire a mirror-chrome table leg, you are looking at a layer roughly a quarter of a micron thick. Everything that makes it look deep, smooth and durable sits beneath it: copper and, above all, nickel.

Acid copper: the leveller

Steel tube carries die lines; polished parts carry fine scratches. Bright acid copper fills those valleys faster than it builds on the peaks, so the surface becomes visibly smoother as the layer grows. Copper is soft and ductile, which helps on parts that are bent or assembled after plating. One rule matters: copper must be cleanly activated before nickel, or the nickel can lift off later.

Bright nickel: the mirror

A good bright nickel does three things at once: it levels remaining scratches, it stays bright in low-current areas such as the inside of a tube bend, and it stays ductile so it does not crack when the part flexes. A bath that is bright only on flat, high-current faces produces hazy or dark zones in recesses.

Steel furniture legs on a rack above a nickel plating bath

Matte nickel: the soft look

Matte (satin) nickel gives a uniform, velvety surface with a softer sheen. It is the base for brushed-look finishes and works beautifully under smoked and gold tones for contemporary furniture.

A note on duplex nickel

In the automotive industry, parts that need very long corrosion life often get two nickel layers: a sulfur-free semi-bright layer under a sulfur-containing bright layer. The small chemical difference makes corrosion spread sideways rather than down to the steel. It shows how much of a finish's life is decided in the nickel.

Avoiding roughness and pinholes

  • Roughness: solid particles in the bath from anode sludge, damaged anode bags, dust or drag-in. Remedy: continuous filtration, intact anode bags, clean racks.
  • Pinholes (pitting): hydrogen bubbles or organic contamination clinging to the surface. Remedy: correct wetting-agent level, agitation, periodic carbon treatment and control of oil drag-in from pretreatment.
  • Hazy or dark recesses: brightener imbalance or metallic contamination. Remedy: regular bath analysis and low-current dummy plating.

Why it matters

Two chrome finishes can look identical on day one and behave very differently after one humid winter. The difference is almost always in the copper and nickel. At Serel Metal, acid copper, bright nickel and matte nickel are the foundation under our chrome and colour finishes.

Serel Metal in İnegöl

Serel Metal, an ERHUN Metal company in İnegöl, Bursa, offers acid copper, bright nickel and matte nickel plating for steel and brass furniture components. Our robotic and manual plating lines handle both large series and special small-batch work. Request a quotation at info@serelmetal.com or export@serelmetal.com.

Have metal furniture parts to finish?

Send your drawing or a sample and we will reply within one business day.